Gantry pay-off machine

A. Equipment usage:

Used for laying out various types of cables during the production of cross-linking, cabling, stranding, armoring, extrusion, and rewinding.

B. Technical parameters:

1. Outer diameter of wire reel: φ 630- φ 2500mm

2. Wire reel width: 475-1180mm

3. Applicable cable diameter: max60mm

4. Payoff speed: max20m/min

5. Applicable coil weight: 12T

6. Lifting motor: AC 1.1kw

7. Clamping motor: AC 0.75kw

B. Structural form:

1. The entire machine consists of two ground beams with walking rollers, two columns, a sleeve type telescopic beam, a wire bracket, and an electrical control box. The clamp sleeve is an upper mounted type.

2. The two spindle centers on the column are equipped with a shaftless loading and unloading line tray. The centers are driven by two 1.1kw AC motors through a cycloidal pinwheel reducer to drive the screw nut for lifting and lowering. Each center seat can be lifted or lowered separately or simultaneously, and is equipped with mechanical and electrical dual protection devices. In order to meet the needs of different specifications of line trays, different specifications of centers are equipped.

3. The sleeve type crossbeam is horizontally moved by a 0.75kW AC motor, reducer, sprocket, and friction clutch through screw nut transmission, used for clamping and loosening the wire coil, and equipped with an overload protection device.

4. The whole machine is equipped with speed and tension adjustment Potentiometer to display tension and paying off speed. The paying off tension is realized by constant torque.