Horizontal tension pay-off

A. Purpose:

1. Used for copper wire, stranded wire, core wire, etc Φ 400-500 axis setting out.

B. Main technical parameters:

1. Suitable wire type: suitable for copper wire, insulated core wire harness stranding or cable stranding, etc.

2. Applicable wire diameter: hard wire 0.3mm – 1.0mm. Core wire: 0.6-3.0mm

3. Maximum line speed: 0-300m/min.

4. Number of wire ends: According to customer requirements.

C. Main accessory brands:

1. Bearings: Japan NSK, Japan KOYO.

D.  Main components and performance of the equipment:

1. Payoff shaft: outer diameter Φ 400-500mm (according to customer coil size)

2. Tension: achieved by combining eccentric wheel and guide wheel springs.

3. Braking: Belt friction braking is used, with internal and external wire breakage for automatic braking and automatic shutdown when the meter reaches the limit.

4. Upper and lower line shafts: Adopting top cone angle to cooperate with loading and unloading.

5. Electrical control: wire breakage limit output.

6. Painting: Apple green (according to customer requirements).

7. Payoff reel shaft diameter: M40.

8. Carrying capacity: The maximum carrying capacity of the pay-off reel is 100Kg.