Vertical tension pay-off rack

A. Purpose:

Used for single copper wire, tinned wire, etc Φ130-200 axis payoff.

B. Main technical parameters:

1. Suitable for wire type: suitable for copper wire, insulated core wire twisted pair wire, etc.

2. Applicable wire diameter: 0.10mm -0.35mm.

3. Maximum line speed: 0-100m/min.

4. Number of wire ends: According to customer requirements.

C. Main accessory brands:

Bearings: Japan NSK, Japan KOYO.

D. Main components and performance of the equipment:

1. Payoff shaft: outer diameter Φ 130-200mm; internal diameter Φ 20-36mm.

2. Tension: achieved by combining eccentric wheel and guide wheel springs.

3. Braking: Belt friction braking is used, with internal and external wire breakage for automatic braking and automatic shutdown when the meter reaches the limit.

4. Upper and lower line shafts: Adopting top cone angle to cooperate with loading and unloading.

5. Electrical control: wire breakage limit output.

6. Painting: Apple green (according to customer requirements).

7. Payoff reel shaft diameter: M18 × 400 mm in length.

8. Carrying capacity: The maximum carrying capacity of the payout tray is 25Kg.